Specification:
Output: Continues 18A, Burst 22A up to 10 Secs.
Voltage Input: 5.6V - 15.0V (Lithium : 2nbsp;- 4S or NiMH/NiCd 5 -12 Cells)
BEC (Battery Elimination Circuit) Output 2A
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrusheLess Motor)
Size 45x25x11mm (length x width x hight)
Weight: 21g

Features:
Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.
Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.
Programmable Items:
Brake Settingsbrake enabled / brake disabled, default is brake disabled
Battery TypeLi-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)default is Li-xx.
Low Voltage Protection Mode(Cutoff Mode) power reducing / power cutoff, default is power reducing.
Low Voltage Protection Threshold(Cutoff Threshold) low / medium / high, default is medium cutoff voltage.
1) For Li-xx batterynumber of battery cells are judged automaticallylow / medium / high cutoff voltage for each cell are: 2.5V/2.75V/3.0V. For example: 3 Cell Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.75*3=8.25V.
2) For Ni-xx battery, low / medium / high cutoff voltages are 60%/65%/70% of the startup voltage. For example: 6 cell NiMH battery, fully charged voltage is 1.44*6=8.64V, when low cutoff voltage is set, the cutoff voltage is : 8.64*60%=5.2V
Remark: Lithium Battery Balance Discharge Monitoring and Protection function is unavailable for 12A series because of the light weight consideration.
Startup mode: normal / soft / super-soft, default is normal startup.
Timing: low / medium / high, default is medium timing.
In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.
Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

Advantages:
Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the prevention of unwanted RF Noise/ Interference during flying.
Extreme low resistance, super current endurance.
Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.
There is a heat radiator on MOSFET, ESC works more reliable.

Click here to download the manual!

Sold Out but can be ordered

Notifications Notify me of stock updates to HiModel Pro 18A Brushless ESC