Product:
GX125A 4-7S (5A BEC) Brushless ESC
Code: GXBL125BEC |
€ 54,50
|
200 Amps Brushless Speed Controller type: GX-200ABEC Features: ● Automatic cell detection. Cutoff will automaticly be set on 3V per cell for LiPo and 0.8V per cell for NiCd/NiMh. ● Start Prevention. The controller will only start the motor after the throttle stick is fully closed when connecting the controller. ● Lost signal protection. If the radio signal is lost or not valid for a period of 1 second or longer, the motor will stop automaticly. Specifications: Working Voltage: 4S-7S LiPo Load continues: 125 Ampere (with good cooling) Load Peak: 150A (10 sec) BEC: Switched 5A PWM: 8 Khz/ 16Khz Dimensions: 65x40x15mm Weight: 86 Gram Voltage cutoff: Automatisch 3.0V per cell Color can differ from the photo. Settings: 1. Cut-off main power of speed controller, switch on the transmitter and receiver. 2. Move throttle stick to up position (full open) 3. Switch on the main power of speed controller 4. Wait for beeps of the speed controller Options of set up: 1. Cut-off voltage option 1. Ni-Mh battery, auto setup option 2. cut-off for 7S lipo option 3. cut-off for 6S lipo option 4. cut-off for 5S lipo option 5. cut-off for 4S lipo option 6. cut-off for 3S lipo 2. Start-up mode option 1: auto set-up throttle range option 2: fixed throttle range option 3: high acceleration (hard start) option 4: low acceleration (soft start) 3. brake option 1: no brake option 2: light brake option 3: medium brake option 4: heavy brake 4. Running features option 1: default running direction option 2: reverse runing option 3: hard brake option 4: soft brake 5. Timing modes option 1: 2° option 2: 7° option 3: 15° option 4: 30° 6. PWM modes option 1: 8K option 2: 16K * THIS ESC IS NOT DESIGNED FOR BOATS APPLICATION, EVEN THERE ARE MANY SUCCESSFUL EXPERIENCES FROM EXPERIENCED BOATS RACERS ONCE EQUIPPED WITH WATER COOLING SYSTEM. EFFICIENT WATER COOLING SYSTEM MUST BE EQUIPPED FOR BOATS APPLICATION, THERE IS NO WARRANTY FOR BOATS APPLICATION, BECAUSE A POOR WATER COOLING SYSTEM MAY CAUSE OVERHEAT AND DAMAGE THE ESC, YET THE EFFICIENCY OF WATER-COOLING SYSTEM IS VERY MUCH DEPENDING ON CUSTOMER'S DESIGN AND WORKMANSHIP.
|